mpls te static-cr-lsp
Use mpls te static-cr-lsp to specify a static CRLSP for a tunnel.
Use undo mpls te static-cr-lsp to remove the configuration.
Syntax
mpls te static-cr-lsp lsp-name
undo mpls te static-cr-lsp lsp-name
Default
A tunnel does not use any static CRLSP.
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
lsp-name: Specifies a static CRLSP by its name, a case-sensitive string of 1 to 15 characters.
Usage guidelines
This command takes effect only when the mpls te signaling static command has been configured in tunnel interface view.
Execute this command on the ingress node. The static CRLSP specified must have been created by using the static-cr-lsp ingress command.
Examples
# Configure tunnel 0 to use static CRLSP static-te-3.
<Sysname> system-view [Sysname] interface tunnel 0 mode mpls-te [Sysname-Tunnel0] mpls te static-cr-lsp static-te-3
Related commands
display mpls te tunnel-interface
mpls te signaling
static-cr-lsp egress
static-cr-lsp ingress
static-cr-lsp transit