mpls te max-link-bandwidth
Use mpls te max-link-bandwidth to set the maximum bandwidth for MPLS TE traffic on an interface.
Use undo mpls te max-link-bandwidth to restore the default.
Syntax
mpls te max-link-bandwidth bandwidth-value
undo mpls te max-link-bandwidth
Default
The maximum link bandwidth for MPLS TE traffic is 0 kbps.
Views
Interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the maximum link bandwidth in the range of 1 to 4294967295 kbps.
Usage guidelines
The device carries the maximum link bandwidth in advertised IGP routes. The tunnel ingress node can obtain the information and use the information in CSPF calculation to select a path that meets the tunnel bandwidth requirements.
Examples
# On VLAN-interface 10, set the maximum link bandwidth for MPLS TE traffic to 1158 kbps.
<Sysname> system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] mpls te max-link-bandwidth 1158
Related commands
display mpls te link-management bandwidth-allocation
mpls te bandwidth
mpls te max-reservable-bandwidth
mpls te max-reservable-bandwidth mam
mpls te max-reservable-bandwidth rdm