mpls te enable (OSPF area view)
Use mpls te enable to enable MPLS TE for an OSPF area.
Use undo mpls te enable to disable MPLS TE for an OSPF area.
Syntax
mpls te enable
undo mpls te enable
Default
MPLS TE is disabled for an OSPF area.
Views
OSPF area view
Predefined user roles
network-admin
Usage guidelines
OSPF TE uses Type-10 opaque LSAs to carry the TE attributes for a link. Before you configure OSPF TE, you must enable opaque LSA advertisement and reception by using the opaque-capability enable command. For more information about opaque LSA advertisement and reception, see Layer 3—IP Routing Configuration Guide.
Examples
# Enable MPLS TE for OSPF process 1 in OSPF area 1.
<Sysname> system-view [Sysname] ospf 1 [Sysname-ospf-1] area 1 [Sysname-ospf-1-area-0.0.0.1] mpls te enable
Related commands
opaque-capability enable (Layer 3—IP Routing Command Reference)