mpls te enable (interface view)
Use mpls te enable to enable MPLS TE on an interface.
Use undo mpls te enable to disable MPLS TE on an interface.
Syntax
mpls te enable
undo mpls te enable
Default
MPLS TE is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
After you enable MPLS TE on an interface by using the mpls te enable command, the interface can act as part of an MPLS TE tunnel.
After you execute the undo mpls te enable command on an interface, MPLS TE is disabled on the interface and all CRLSPs on the interface are deleted.
Examples
# Enable MPLS TE on VLAN-interface 10.
<Sysname> system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] mpls te enable
Related commands
display mpls te link-management bandwidth-allocation
mpls te