display isis mpls te tunnel
Use display isis mpls te tunnel to display MPLS TE tunnel interface information for IS-IS.
Syntax
display isis mpls te tunnel [ level-1 | level-2 ] [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
level-1: Displays tunnel interface information for Level-1 routers.
level-2: Displays tunnel interface information for Level-2 routers.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. If you do not specify an IS-IS process, this command displays tunnel information for all IS-IS processes.
Usage guidelines
If you do not specify the level-1 or level-2 keyword, this command displays IS-IS tunnel interface information for both IS-IS Level-1 and IS-IS Level-2 routers.
Examples
# Display MPLS TE tunnel interface information for IS-IS.
<Sysname> display isis mpls te tunnel MPLS-TE tunnel information for IS-IS(1) --------------------------------------- Level-1 Tunnel Statistics ------------------------- Tunnel Name Auto Route Destination Metric ----------------------------------------------------------------------- Tun0 Advertise 2.2.2.2 Relative 0 Level-2 Tunnel Statistics ------------------------- Tunnel Name Auto Route Destination Metric ----------------------------------------------------------------------- Tun0 Advertise 2.2.2.2 Relative 0
Table 25: Command output
Field | Description |
---|---|
MPLS-TE tunnel information for IS-IS(1) | MPLS TE tunnel interface information for IS-IS process 1. |
Auto Route | Automatic route advertisement method on the tunnel interface:
|
Destination | Tunnel destination address. |
Metric | Metric type and value configured on the tunnel interface:
|