display mpls ldp interface
Use display mpls ldp interface to display LDP interface information.
Syntax
display mpls ldp interface [ vpn-instance vpn-instance-name ] [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. This command displays LDP interface information for the specified VPN instance. If you do not specify a VPN instance, this command displays LDP interface information for the public network.
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an interface, this command displays information about all LDP interfaces.
Examples
# Display information about all interfaces enabled with IPv4 LDP for the public network.
<Sysname> display mpls ldp interface Interface MPLS LDP Auto-config Vlan10 Enabled Configured - Vlan20 Enabled Configured -
Table 14: Command output
Field | Description |
---|---|
Interface | Interface enabled with LDP. |
MPLS | Whether the interface is enabled with MPLS. |
LDP | Whether the interface is configured with the mpls ldp enable command. |
Auto-config | This field is not supported in the current software version. LDP automatic configuration information:
|
Related commands
mpls ldp
mpls ldp enable