hardware-resource mpls
Use hardware-resource mpls to specify a hardware resource mode for MPLS-based ECMP forwarding.
Use undo hardware-resource mpls to restore the default.
Syntax
hardware-resource mpls { l3vpn | normal }
undo hardware-resource mpls
Default
The normal hardware resource mode is used.
Views
System view
Predefined user roles
network-admin
Parameters
l3vpn: Specifies the enhanced hardware resource mode.
normal: Specifies the normal hardware resource mode.
Usage guidelines
This command is available only in Release 2708.
Configure this command to specify a hardware resource mode for MPLS-based ECMP forwarding:
Enhanced—MPLS-based ECMP forwarding can use all hardware resources.
Normal—MPLS-based ECMP forwarding can use up to 40% of the hardware resources.
If you specify the enhanced hardware resource mode, ECMP forwarding cannot be performed over VXLAN, MPLS L2VPN, or VPLS.
Examples
# Specify the enhanced hardware resource mode for MPLS-based ECMP forwarding.
<Sysname> system [Sysname] hardware-resource mpls l3vpn