display mpls nid
Use display mpls nid to display usage information for NIDs.
Syntax
display mpls nid [ nid-value1 [ to nid-value2 ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
nid-value1: Specifies an NID. The value range is 0 to 65535. If used with the nid-value2 argument, the nid-value1 argument represents the start NID of an NID range.
to nid-value2: Specifies the end NID of the NID range. The value range for the end NID is 0 to 65535. If you specify an NID range by using the nid-value1 argument and the to nid-value2 option, this command displays usage information for the specified range of NIDs.
Usage guidelines
NIDs are 32-bit binary numbers. They include fixed NIDs and dynamic NIDs.
Fixed NIDs—Generated for tunnel interfaces. The highest four bits are a value other than 0000.
Dynamic NIDs—NIDs except fixed NIDs. The highest four bits are 0s.
This command displays usage information only for dynamic NIDs.
If you do not specify any parameters, this command displays usage information for all dynamic NIDs.
Examples
# Display usage information for dynamic NIDs 1028 through 1500.
<Sysname> display mpls nid 1028 to 1500 NID alloc state: '.' means not used, '$' means used 1028 :...$.... ........ ........ ........ ........ ........ ........ ........ 1092 :........ ........ ........ ........ ........ ........ ........ ........ 1156 :........ ........ ........ ........ ........ ........ ........ ........ 1220 :........ ........ ........ ........ ........ ........ ........ ........ 1284 :........ ........ ........ ........ ........ ........ ........ ........ 1348 :........ ........ ........ ........ ........ ........ ........ ........ 1412 :........ ........ ........ ........ ........ ........ ........ ........ 1476 :........ ........ ........ .