display mpls interface
Use display mpls interface to display MPLS interface information, including the interface name, interface status, and interface MPLS MTU.
Syntax
display mpls interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by the interface type and number. If you do not specify an interface, this command displays MPLS information for all MPLS-enabled interfaces.
Examples
# Display all MPLS interfaces.
<Sysname> display mpls interface Interface Status MPLS MTU Vlan10 Up 1500 Vlan20 Up 1500
The MPLS MTU of an interface is in bytes.
Related commands
mpls enable
mpls mtu