mld-snooping overflow-replace
Use mld-snooping overflow-replace to enable the IPv6 multicast group replacement feature on a port.
Use undo mld-snooping overflow-replace to disable the multicast group replacement feature on a port.
Syntax
mld-snooping overflow-replace [ vlan vlan-list ]
undo mld-snooping overflow-replace [ vlan vlan-list ]
Default
The IPv6 multicast group replacement feature is disabled.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to 4094. If you do not specify a VLAN, this command takes effect on all VLANs.
Usage guidelines
This command takes effect only on the IPv6 multicast groups that a port joins dynamically.
You can enable the IPv6 multicast group replacement feature for a port in interface view or globally for all ports in MLD-snooping view. For a port, the port-specific configuration takes priority over the global configuration.
Examples
# On HundredGigE 1/0/1, enable the IPv6 multicast group replacement feature for VLAN 2.
<Sysname> system-view [Sysname] interface hundredgige 1/0/1 [Sysname-HundredGigE1/0/1] mld-snooping overflow-replace vlan 2
Related commands
overflow-replace (MLD-snooping view)