max-response-time (MLD-snooping view)
Use max-response-time to set the maximum response time for MLD general queries globally.
Use undo max-response-time to restore the default.
Syntax
max-response-time seconds
undo max-response-time
Default
The maximum response time for MLD general queries is 10 seconds.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
seconds: Specifies the maximum response time for MLD general queries, in the range of 1 to 3174 seconds.
Usage guidelines
You can set the time globally for all VLANs and VSIs in MLD-snooping view, for a VSI in VSI view, or for a VLAN in VLAN view. For a VSI, the VSI-specific configuration takes priority over the global configuration. For a VLAN, the VLAN-specific configuration takes priority over the global configuration.
To avoid mistakenly deleting IPv6 multicast group members, set the maximum response time for MLD general queries to be less than the MLD general query interval.
Examples
# Set the global maximum response time for MLD general queries to 5 seconds.
<Sysname> system-view [Sysname] mld-snooping [Sysname-mld-snooping] max-response-time 5
Related commands
mld-snooping max-response-time
mld-snooping query-interval