display ipv6 l2-multicast ip

Use display ipv6 l2-multicast ip to display information about Layer 2 IPv6 multicast groups.

Syntax

In standalone mode:

display ipv6 l2-multicast ip [ group ipv6-group-address ] [ vlan vlan-id | vsi vsi-name ] [ slot slot-number ]

In IRF mode:

display ipv6 l2-multicast ip [ group ipv6-group-address ] [ vlan vlan-id | vsi vsi-name ] [ chassis chassis-number slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

group ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. If you do not specify an IPv6 multicast group, this command displays information about all Layer 2 IPv6 multicast groups.

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN, this command displays information about Layer 2 IPv6 multicast groups for all VLANs.

vsi vsi-name: Specifies a VSI by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VSI, this command displays information about Layer 2 IPv6 multicast groups for all VSIs.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays information about Layer 2 IP multicast groups for the MPU. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. If you do not specify a card, this command displays information about Layer 2 IP multicast groups for the global active MPU. (In IRF mode.)

Examples

# Display information about Layer 2 IPv6 multicast groups for VLAN 2.

<Sysname> display ipv6 l2-multicast ip vlan 2
Total 1 entries.

VLAN 2: Total 1 entries.
   (::, FF1E::101)
    Attribute: static, success
    Host ports (1 in total):
      HGE1/0/1                              (S, SUC)

# Display information about Layer 2 IPv6 multicast groups for VSI aaa.

<Sysname> display ipv6 l2-multicast ip vsi aaa
Total 1 entries.

VSI aaa: Total 1 entries.
  (::, FF1E::101)
    Attribute: dynamic, success
    Host ports (1 in total):
      HGE1/0/3 (Link ID 0)                  (D, SUC)

Table 56: Command output

Field	Description
Total 1 entries	Total number of Layer 2 IPv6 multicast groups.
VLAN 2: Total 1 entries	Total number of Layer 2 IPv6 multicast groups in VLAN 2.
VSI aaa: Total 1 entries	Total number of Layer 2 IPv6 multicast groups in VSI aaa.
(::, FF1E::101)	(S, G) entry, where a double colon (::) in the S position means all IPv6 multicast sources.
Attribute	Entry attribute: dynamic—The entry is created by a dynamic protocol. static—The entry is created by a static protocol. pim—The entry is created by IPv6 PIM. kernel—The entry is obtained from the kernel. success—Processing has succeeded. fail—Processing has failed.
Host ports (1 in total)	Member ports and total number of member ports.
(S, SUC)	Port attribute: D—Dynamic port. S—Static port. P—IPv6 PIM port. K—Port obtained from the kernel. R—Port learned from (, ) entries. W—Port learned from (, G) entries. SUC*—Processing has succeeded. F—Processing has failed. BC—The port is a multicast tunnel port for a multicast-mode VXLAN.
HGE1/0/3 (Link ID 0)	Layer 3 Ethernet interface and its link ID.
NPW (Link ID 8)	N-PW interface and its link ID.
UPW (Link ID 9)	U-PW interface and its link ID.
Tun0 (VXLAN ID 0)	VXLAN tunnel interface and its VXLAN ID.

prev	up	next
display ipv6 l2-multicast fast-forwarding cache	home	display ipv6 l2-multicast ip forwarding