timer hello (PIM view)

Use timer hello to set the hello interval globally.

Use undo timer hello to restore the default.

Syntax

timer hello interval

undo timer hello

Default

The hello interval is 30 seconds.

Views

PIM view

Predefined user roles

network-admin

Parameters

interval: Specifies a hello interval in the range of 0 to 18000 seconds. If you set the value to 0 seconds, the device does not send hello messages.

Usage guidelines

You can set the hello interval globally for all interfaces in PIM view or for an interface in interface view. For an interface, the interface-specific configuration takes priority over the global configuration.

Examples

# Set the global hello interval to 40 seconds on the public network.

<Sysname> system-view
[Sysname] pim
[Sysname-pim] timer hello 40

Related commands

pim timer hello