state-refresh-ttl (PIM view)

Use state-refresh-ttl to set the TTL value for state refresh messages.

Use undo state-refresh-ttl to restore the default.

Syntax

state-refresh-ttl ttl-value

undo state-refresh-ttl

Default

The TTL value for state refresh messages is 255.

Views

PIM view

Predefined user roles

network-admin

Parameters

ttl-value: Specifies the TTL value for state refresh messages, in the range of 1 to 255.

Examples

# Set the TTL value to 45 for state refresh messages on the public network.

<Sysname> system-view
[Sysname] pim
[Sysname-pim] state-refresh-ttl 45

Related commands

pim state-refresh-capable (PIM view)

state-refresh-interval (PIM view)

state-refresh-rate-limit (PIM view)