state-refresh-rate-limit (PIM view)

Use state-refresh-rate-limit to set the waiting time to accept a new state refresh message.

Use undo state-refresh-rate-limit to restore the default.

Syntax

state-refresh-rate-limit time

undo state-refresh-rate-limit

Default

The device waits 30 seconds before it accepts a new state refresh message.

Views

PIM view

Predefined user roles

network-admin

Parameters

time: Specifies the waiting time to accept a new refresh message, in the range of 1 to 65535 seconds.

Examples

# Set the waiting time to 45 seconds to accept a new state refresh message on the public network.

<Sysname> system-view
[Sysname] pim
[Sysname-pim] state-refresh-rate-limit 45

Related commands

pim state-refresh-capable

state-refresh-interval (PIM view)

state-refresh-ttl (PIM view)