pim state-refresh-capable
Use pim state-refresh-capable to enable the state refresh feature on an interface.
Use undo pim state-refresh-capable to disable the state refresh feature.
Syntax
pim state-refresh-capable
undo pim state-refresh-capable
Default
The state refresh feature is enabled.
Views
Interface view
Predefined user roles
network-admin
Examples
# Disable the state refresh feature on VLAN-interface 100.
<Sysname> system-view [Sysname] interface vlan-interface 100 [Sysname-Vlan-interface100] undo pim state-refresh-capable
Related commands
state-refresh-interval (PIM view)
state-refresh-rate-limit (PIM view)
state-refresh-ttl (PIM view)