pim holdtime join-prune

Use pim holdtime join-prune to set the joined/pruned state holdtime on an interface.

Use undo pim holdtime join-prune to restore the default.

Syntax

pim holdtime join-prune time

undo pim holdtime join-prune

Default

The joined/pruned state holdtime is 210 seconds.

Views

Interface view

Predefined user roles

network-admin

Parameters

time: Specifies a joined/pruned state holdtime in the range of 1 to 65535 seconds.

Usage guidelines

You can set the joined/pruned state holdtime for an interface in interface view or globally for all interfaces in PIM view. For an interface, the interface-specific configuration takes priority over the global configuration.

To prevent the upstream neighbors from aging out, you must configure the join/prune interval to be less than the joined/pruned state holdtime.

Examples

# Set the joined/pruned state holdtime to 280 seconds on VLAN-interface 100.

<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim holdtime join-prune 280

Related commands

holdtime join-prune (PIM view)

pim timer join-prune