holdtime join-prune (PIM view)

Use holdtime join-prune to set the joined/pruned state holdtime globally.

Use undo holdtime join-prune to restore the default.

Syntax

holdtime join-prune time

undo holdtime join-prune

Default

The joined/pruned state holdtime is 210 seconds.

Views

PIM view

Predefined user roles

network-admin

Parameters

time: Specifies a joined/pruned state holdtime in the range of 1 to 65535 seconds.

Usage guidelines

You can set the joined/pruned state holdtime globally for all interfaces in PIM view or for an interface in interface view. For an interface, the interface-specific configuration takes priority over the global configuration.

To prevent the upstream neighbors from aging out, you must set the join/prune interval to be less than the joined/pruned state holdtime.

Examples

# Set the global joined/pruned state holdtime to 280 seconds on the public network.

<Sysname> system-view
[Sysname] pim
[Sysname-pim] holdtime join-prune 280

Related commands

pim holdtime join-prune

timer join-prune (PIM view)