display pim bsr-info

Use display pim bsr-info to display BSR information.

Syntax

display pim [ vpn-instance vpn-instance-name ] bsr-info

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command displays BSR information on the public network.

Examples

# Display BSR information on the public network.

<Sysname> display pim bsr-info
 Scope: non-scoped
     State: Accept Preferred
     Bootstrap timer: 00:01:44
     Elected BSR address: 12.12.12.1
       Priority: 64
       Hash mask length: 30
       Uptime: 00:21:56

 Scope: 239.4.0.0/16
     State: Accept Any
     Scope-zone expiry timer: 00:21:12

 Scope: 239.1.0.0/16
     State: Elected
     Bootstrap timer: 00:00:26
     Elected BSR address: 17.1.11.1
       Priority: 64
       Hash mask length: 30
       Uptime: 02:53:37
     Candidate BSR address: 17.1.11.1
       Priority: 64
       Hash mask length: 30

 Scope: 239.2.2.0/24
     State: Candidate
     Bootstrap timer: 00:01:56
     Elected BSR address: 61.2.37.1
       Priority: 64
       Hash mask length: 30
       Uptime: 02:53:32
     Candidate BSR address: 17.1.12.1
       Priority: 64
       Hash mask length: 30

 Scope: 239.3.3.0/24
     State: Pending
     Bootstrap timer: 00:00:07
     Candidate BSR address: 17.1.13.1
       Priority: 64
       Hash mask length: 30

Table 40: Command output

Field

Description

Bootstrap timer

Aging timer for the BSR.

Scope-zone expiry timer

Aging timer for the scoped zone.

Elected BSR address

Address of the elected BSR.

Candidate BSR address

Address of the C-BSR.

Priority

BSR priority.

Uptime

Length of time the BSR has been up.