igmp startup-query-interval

Use igmp startup-query-interval to set the IGMP startup query interval on an interface.

Use undo igmp startup-query-interval to restore the default.

Syntax

igmp startup-query-interval interval

undo igmp startup-query-interval

Default

The IGMP startup query interval equals one quarter of the IGMP general query interval.

Views

Interface view

Predefined user roles

network-admin

Parameters

interval: Specifies an IGMP startup query interval in the range of 1 to 31744 seconds.

Usage guidelines

You can set the IGMP startup query interval for an interface in interface view or globally for all interfaces in IGMP view. For an interface, the interface-specific configuration takes priority over the global configuration.

Examples

# Set the IGMP startup query interval to 100 seconds on VLAN-interface 100.

<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp startup-query-interval 100

Related commands

startup-query-interval (IGMP view)