display multicast boundary
Use display multicast boundary to display multicast boundary information.
Syntax
display multicast [ vpn-instance vpn-instance-name ] boundary [ group-address [ mask-length | mask ] ] [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command displays multicast boundary information on the public network.
group-address: Specifies a multicast group by its IP address in the range of 224.0.0.0 to 239.255.255.255. If you do not specify a multicast group, this command displays multicast boundary information for all multicast groups.
mask-length: Specifies an address mask length in the range of 4 to 32. The default is 32.
mask: Specifies an address mask. The default is 255.255.255.255.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not specify an interface, this command displays multicast boundary information for all interfaces.
Examples
# Display information about all multicast boundaries on the public network.
<Sysname> display multicast boundary Boundary Interface 224.1.1.0/24 Vlan1 239.2.2.0/24 Vlan2
Table 23: Command output
Field | Description |
|---|---|
Boundary | Multicast group associated with the multicast boundary. |
Interface | Boundary interface associated with the multicast boundary. |
Related commands
multicast boundary