pim-snooping graceful-restart join-aging-time
Use pim-snooping graceful-restart join-aging-time to set the aging time for global downstream ports and global router ports on the new active MPU after an active/standby switchover.
Use undo pim-snooping graceful-restart join-aging-time to restore the default.
Syntax
pim-snooping graceful-restart join-aging-time seconds
undo pim-snooping graceful-restart join-aging-time
Default
The default setting is 210 seconds.
Views
VLAN view
VSI view
Predefined user roles
network-admin
Parameters
seconds: Specifies an aging time in the range of 210 to 18000 seconds.
Usage guidelines
You must enable PIM snooping for a VLAN or VSI before you execute this command.
Global ports include Layer 2 aggregate interfaces, AC interfaces, N-PW interfaces, and U-PW interfaces. A global downstream port or a global router port is a global port that acts as a downstream port or router port, respectively.
Examples
# In VLAN 2, set the aging time to 600 seconds for global downstream ports and global router ports on the new active MPU after an active/standby switchover.
<Sysname> system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] igmp-snooping enable [Sysname-vlan2] pim-snooping enable [Sysname-vlan2] pim-snooping graceful-restart join-aging-time 600
# In VSI aaa, set the aging time to 600 seconds for global downstream ports and global router ports on the new active MPU after an active/standby switchover.
<Sysname> system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vsi aaa [Sysname-vsi-aaa] igmp-snooping enable [Sysname-vsi-aaa] pim-snooping enable [Sysname-vsi-aaa] pim-snooping graceful-restart join-aging-time 600
Related commands
pim-snooping enable