igmp-snooping router-aging-time

Use igmp-snooping router-aging-time to set the aging timer for dynamic router ports in a VLAN or VSI.

Use undo igmp-snooping router-aging-time to restore the default.

Syntax

igmp-snooping router-aging-time seconds

undo igmp-snooping router-aging-time

Default

The aging timer for dynamic router ports is 260 seconds in a VLAN or VSI.

Views

VLAN view

VSI view

Predefined user roles

network-admin

Parameters

seconds: Specifies an aging timer for dynamic router ports, in the range of 1 to 8097894 seconds.

Usage guidelines

You must enable IGMP snooping for a VLAN or VSI before you execute this command.

You can set the timer for a VLAN in VLAN view, for a VSI in VSI view, or globally for all VLANs and VSIs in IGMP-snooping view. For a VLAN, the VLAN-specific configuration takes priority over the global configuration. For a VSI, the VSI-specific configuration takes priority over the global configuration.

Examples

# In VLAN 2, enable IGMP snooping, and set the aging timer for dynamic router ports to 100 seconds.

<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping router-aging-time 100

# In VSI aaa, enable IGMP snooping, and set the aging timer for dynamic router ports to 100 seconds.

<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vsi aaa
[Sysname-vsi-aaa] igmp-snooping enable
[Sysname-vsi-aaa] igmp-snooping router-aging-time 100

Related commands

enable (IGMP-snooping view)

igmp-snooping enable

router-aging-time (IGMP-snooping view)