igmp-snooping query-interval
Use igmp-snooping query-interval to set the IGMP general query interval for a VLAN or VSI.
Use undo igmp-snooping query-interval to restore the default.
Syntax
igmp-snooping query-interval interval
undo igmp-snooping query-interval
Default
The IGMP general query interval is 125 seconds for a VLAN or VSI.
Views
VLAN view
VSI view
Predefined user roles
network-admin
Parameters
interval: Specifies an IGMP general query interval in the range of 2 to 31744 seconds.
Usage guidelines
You must enable IGMP snooping for a VLAN or VSI before you execute this command.
To avoid mistakenly deleting multicast group members, set the IGMP general query interval to be greater than the maximum response time for IGMP general queries.
Examples
# In VLAN 2, enable IGMP snooping, and set the IGMP general query interval to 20 seconds.
<Sysname> system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] igmp-snooping enable [Sysname-vlan2] igmp-snooping query-interval 20
# In VSI aaa, enable IGMP snooping, and set the IGMP general query interval to 20 seconds.
<Sysname> system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vsi aaa [Sysname-vsi-aaa] igmp-snooping enable [Sysname-vsi-aaa] igmp-snooping query-interval 20
Related commands
enable (IGMP-snooping view)
igmp-snooping enable
igmp-snooping max-response-time
igmp-snooping querier
max-response-time