dot1p-priority (IGMP-snooping view)
Use dot1p-priority to set the 802.1p priority for IGMP messages globally.
Use undo dot1p-priority to restore the default.
Syntax
dot1p-priority priority
undo dot1p-priority
Default
The 802.1p priority for IGMP messages is not configured. For IGMP messages created by the device, the 802.1p priority is 0. For IGMP messages to be forwarded, the device does not change the 802.1p priority.
Views
IGMP-snooping view
Predefined user roles
network-admin
Parameters
priority: Specifies an 802.1p priority for IGMP messages, in the range of 0 to 7. The greater the value, the higher the priority.
Usage guidelines
You can set the 802.1p priority globally for all VLANs and VSIs in IGMP-snooping view or for a VLAN in VLAN view. For a VLAN, the VLAN-specific configuration takes priority over the global configuration.
Examples
# Set the 802.1p priority for IGMP messages to 3 globally.
<Sysname> system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] dot1p-priority 3
Related commands
igmp-snooping dot1p-priority