oap client reboot

Use oap client reboot to restart an OAP client.

Syntax

oap client reboot client-id

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

client-id: Specifies an OAP client by its ID in the range of 1 to 255.

Usage guidelines

Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.

When you execute this command for a client in registered state, the OAP manager sends a restart notification to the specified OAP client. The client restarts after receiving the notification. When you execute this command for a non-existent client, an error message appears.

Examples

# Restart OAP client 1.

<Sysname> system-view
[Sysname] oap client reboot 1

Related commands

• display oap client summary

• oap client close