display oap client summary
Use display oap client summary to display the summary registration information of OAP clients.
Syntax
display oap client summary [ client-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
client-id: Specifies an OAP client by its ID in the range of 1 to 255. If you do not specify this argument, the command displays the summary registration information of all OAP clients in ascending order of client IDs.
Usage guidelines
Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.
Examples
# Display the summary registration information of OAP client 1.
<Sysname> display oap client summary 1 Client ID: 1 Status: Registered MAC Address: 3ce5-a6ad-7abf Interface: Ten-GigabitEthernet2/19/0/1 Last registered: 08/29/2007 11:52:43
# Display the summary registration information of all OAP clients.
<Sysname> display oap client summary Client ID: 1 Status: Registered MAC Address: 3ce5-a6ad-7abf Interface: Ten-GigabitEthernet2/19/0/1 Last registered: 08/29/2007 11:52:43 Client ID: 2 Status: Registered MAC Address: 0cda-414a-95ae Interface: Ten-GigabitEthernet2/16/0/1 Last registered: 08/29/2007 12:41:39
Table 1: Command output
Field | Description |
---|---|
Status | Status of the OAP client, which is always Registered. |
MAC Address | MAC address of the OAP client. |
Interface | Interface used to communicate with the OAP client. |
Last registered | Registration time of the client. |
Related commands
display oap client info