display oap client info

Use display oap client info to display OAP client information.

Syntax

display oap client info [ client-id ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

client-id: Specifies an OAP client by its ID in the range of 1 to 255. If you do not specify this argument, the command displays information about all OAP clients in ascending order of client IDs.

Usage guidelines

Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.

The OAP manager obtains OAP client information from notification packets received from OAP clients. If the information about a field is missing, the field is not displayed.

Examples

# Display information about OAP client 1.

<Sysname> display oap client info 1
 Client ID: 1
 Client Description: SecBlade FW
 Hardware: A.0
 System Software: COMWAREV500R002B108D010
 Application Software: V300R001B01D809
 CPU: RMI XLR732 1000MHz CPU
 PCB Version: A.0
 CPLD Version: 3.0
 Bootrom Version: Basic BootRom Version:1.28,Extend BootRom Version:1.51
 Storage Card: 247M Bytes Compact Flash Storage Device
 Memory: 3584M Bytes DDR2 SDRAM Memory

# Display information about all OAP clients.

<Sysname> display oap client info
 Client ID: 1
 Client Description: SecBlade FW
 Hardware: A.0
 System Software: COMWAREV500R002B108D010
 Application Software: V300R001B01D809
 CPU: RMI XLR732 1000MHz CPU
 PCB Version: A.0
 CPLD Version: 3.0
 Bootrom Version: Basic BootRom Version:1.28,Extend BootRom Version:1.51
 Storage Card: 247M Bytes Compact Flash Storage Device
 Memory: 3584M Bytes DDR2 SDRAM Memory

Related commands

display oap client summary