oap reboot
Use oap reboot to reboot an OAP module.
Syntax
In standalone mode:
oap reboot slot slot-number
In IRF mode:
oap reboot chassis chassis-number slot slot-number
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
slot slot-number: Specifies an OAP module by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an OAP module in an IRF member device by the member ID and slot number. (In IRF mode.)
Examples
# In standalone mode, reboot the OAP module in slot 3.
<Sysname> oap reboot slot 3 This command might cause data loss on the hard disk if the card is not been shut down. Continue? [Y/N]:y Rebooting the OAP card by command…
# In IRF mode, reboot the OAP module in slot 5 on member device 2.
<Sysname> oap reboot chassis 2 slot 5 This command might cause data loss on the hard disk if the card is not been shut down. Continue? [Y/N]:y Rebooting the OAP card by command…