qos queue-statistics outbound
Use qos queue-statistics outbound to enable queue-based accounting in the outbound direction of all interfaces.
Use undo qos queue-statistics outbound to disable queue-based accounting in the outbound direction of all interfaces.
Syntax
qos queue-statistics outbound
undo qos queue-statistics outbound
Default
Queue-based accounting is enabled in the outbound direction of all interfaces.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
The qos queue-statistics outbound command is supported by only the default MDC. After you configure this command on the default MDC, the configuration also takes effect on non-default MDCs. For more information about MDCs, see Virtual Technologies Configuration Guide.
This command can only collect statistics for known unicast packets received from FD and FG cards. This command cannot collect statistics for unknown unicast packets, broadcast packets, multicast packets, or protocol packets.
Examples
# Enable queue-based traffic accounting in the outbound direction of all interfaces.
<Sysname> system-view [Sysname] qos queue-statistics outbound
Related commands
display qos queue-statistics interface outbound