qos wfq
Use qos wfq to enable weight-based WFQ.
Use undo qos wfq to restore the default.
Syntax
qos wfq weight
undo qos wfq weight
Default
An interface uses SP queuing.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
weight: Allocates bandwidth to queues based on their weights.
Usage guidelines
You must use the qos wfq command to enable WFQ before you can configure WFQ queuing parameters for a queue on an interface.
After WFQ is enabled on an interface, all queues on the interface have a default scheduling weight of 1 and a default minimum guaranteed bandwidth of 40 kbps.
Examples
# Enable weight-based WFQ on GigabitEthernet 3/0/1.
<Sysname> system-view [Sysname] interface gigabitethernet 3/0/1 [Sysname-GigabitEthernet3/0/1] qos wfq weight
Related commands
display qos queue wfq interface