display qos queue wfq interface
Use display qos queue wfq interface to display the WFQ configuration on an interface.
Syntax
display qos queue wfq interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified, this command displays the WFQ configuration of all interfaces.
Examples
# Display the WFQ configuration of GigabitEthernet 2/0/1.
<Sysname> display qos queue wfq interface gigabitethernet 2/0/1 Interface: GigabitEthernet2/0/1 Output queue: Hardware Weighted Fair Queuing Queue ID Weight Min-Bandwidth ---------------------------------------------------------------- be 2 40 af1 1 40 af2 1 40 af3 1 40 af4 1 40 ef 1 40 cs6 1 40 cs7 1 40
Table 37: Command output
Field | Description |
---|---|
Interface | Interface type and interface number. |
Output queue | Type of the current output queue. |
Min-Bandwidth | Minimum guaranteed bandwidth in kbps. |