display qos policy control-plane management pre-defined
Use display qos policy control-plane management pre-defined to display information about the predefined QoS policy applied to the management interface control plane.
Syntax
display qos policy control-plane management pre-defined
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display information about the predefined QoS policy applied to the management interface control plane.
<Sysname> display qos policy control-plane management pre-defined Pre-defined policy information Protocol Priority Bandwidth (kbps) Group Default N/A 100000 N/A ARP N/A 100000 normal BGP N/A 100000 critical BGPv6 N/A 100000 critical HTTP N/A 100000 management HTTPS N/A 100000 management ICMP N/A 100000 monitor ICMPv6 N/A 100000 monitor OSPF Multicast N/A 100000 critical OSPF Unicast N/A 100000 critical OSPFv3 Multicast N/A 100000 critical OSFPv3 Unicast N/A 100000 critical PIM Multicast N/A 100000 critical PIM Unicast N/A 100000 critical PIMv6 Multicast N/A 100000 critical PIMv6 Unicast N/A 100000 critical RADIUS N/A 100000 management RIP N/A 100000 critical RIPng N/A 100000 critical SNMP N/A 100000 management SSH N/A 100000 management TELNET N/A 100000 management FTP N/A 100000 management TFTP N/A 100000 management
Table 25: Command output
Field | Description |
|---|---|
Pre-defined control plane policy management | Predefined QoS policy applied to the management interface control plane. |
Protocol | System-defined protocol packet type. |
Group | Protocol group to which the protocol belongs. This field is not supported in the current software version and is reserved for future support. |