ipv6 mtu

Use ipv6 mtu to set the MTU of IPv6 packets sent over an interface.

Use undo ipv6 mtu to restore the default MTU.

Syntax

ipv6 mtu mtu-size

undo ipv6 mtu

Default

No MTU is configured for an interface.

Views

Layer 3 interface view

Predefined user roles

network-admin

mdc-admin

Parameters

mtu-size: Specifies the size of the MTUs of an interface, in the range of 1280 to 10240 bytes.

Usage guidelines

IPv6 routers do not support packet fragmentation. After an IPv6 router receives an IPv6 packet, if the packet size is greater than the MTU of the forwarding interface, the router discards the packet. Meanwhile, the router sends the MTU to the source host through an ICMPv6 packet — Packet Too Big message. The source host fragments the packet according to the MTU and resends it. To reduce the extra flow overhead resulting from packet drops, configure an appropriate interface MTU for your network.

Examples

# Set the MTU of IPv6 packets sent over VLAN-interface 100 to 1280 bytes.

<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 mtu 1280