Logging in through the console port on the OAP module

  1. Connect one end of the console cable to the serial port of the configuration terminal (for example, a PC).

  2. Connect the other end of the console cable to the console port of the OAP module.

  3. Start the PC and run a terminal emulation program, such as HyperTerminal.

  4. Select the COM connection mode and set the terminal parameters as follows:

    • Bits per second—9600

    • Data bits—8

    • Parity check mode—None

    • Stop bits—1

    • Flow control—None

  5. Follow the OAP module user guide to log in to the operating system of the OAP module through the terminal emulation program.