Exiting FIPS mode through automatic reboot

A user has logged in to the device in FIPS mode through a console port.

Use the automatic reboot method to exit FIPS mode.

# Disable FIPS mode.

[Sysname] undo fips mode enable
FIPS mode change requires a device reboot. Continue? [Y/N]:y
The system will create a new startup configuration file for non-FIPS mode and then reboot automatically. Continue? [Y/N]:y
Waiting for reboot... After reboot, the device will enter non-FIPS mode.

After the device reboots, you can enter the system.

<Sysname>

# Display the FIPS mode state.

<Sysname> display fips status
FIPS mode is disabled.