Configuring SNMP notifications for IKE
After you enable SNMP notifications for IKE, the IKE module notifies the NMS of important module events. The notifications are sent to the device's SNMP module. You can configure the notification transmission parameters for the SNMP module to specify how the SNMP module displays notifications. For more information about SNMP notifications, see Network Management and Monitoring Configuration Guide.
To generate and output SNMP notifications for a specific IKE failure or event type, perform the following tasks:
Enable SNMP notifications for IKE globally.
Enable SNMP notifications for the failure or event type.
To configure SNMP notifications for IKE:
Step | Command | Remarks |
|---|---|---|
1. Enter system view | system-view | N/A |
2. Enable SNMP notifications for IKE globally. | snmp-agent trap enable ike global | By default, SNMP notifications for IKE are enabled. |
3. Enable SNMP notifications for the specified failure or event types. | snmp-agent trap enable ike [ attr-not-support | auth-failure | cert-type-unsupport | cert-unavailable | decrypt-failure | encrypt-failure | invalid-cert-auth | invalid-cookie | invalid-id | invalid-proposal | invalid-protocol | invalid-sign | no-sa-failure | proposal-add | proposal–delete | tunnel-start | tunnel-stop | unsupport-exch-type ] * | By default, SNMP notifications for all failure and event types are enabled. |