Enabling portal roaming
Portal roaming takes effect only on portal users logging in from VLAN interfaces. It does not take effect on portal users logging in from common Layer 3 interface.
If portal roaming is enabled on a VLAN interface, an online portal user can access resources from any Layer 2 port in the VLAN without re-authentication.
If portal roaming is disabled, to access external network resources from a Layer 2 port different from the current access port in the VLAN, the user must do the following:
First log out from the current port.
Then re-authenticate on the new Layer 2 port.
To enable portal roaming:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable portal roaming. | portal roaming enable | By default, portal roaming is disabled. You cannot enable portal roaming when online portal users or preauthentication portal users exist on the device. |