Enabling outgoing packets filtering on a portal-enabled interface
When you enable this feature on a portal-enabled interface, the device permits the interface to send the following packets:
Packets whose destination IP addresses are IP addresses of authenticated portal users.
Packets that match portal-free rules.
Other outgoing packets on the interface are dropped.
To enable outgoing packets filtering on a portal-enabled interface:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | N/A |
3. Enable outgoing packets filtering. | portal [ ipv6 ] outbound-filter enable | By default, outgoing packets filtering is disabled. The interface can send any packets. |