Specifying an access control method

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter Ethernet interface view.	interface interface-type interface-number	N/A
3. Specify an access control method.	dot1x port-method { macbased \| portbased }	By default, MAC-based access control applies. To use both 802.1X and portal authentication on a port, you must specify MAC-based access control. For information about portal authentication, see "Configuring portal authentication."

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter Ethernet interface view.

interface interface-type interface-number

N/A

3. Specify an access control method.

dot1x port-method { macbased | portbased }

By default, MAC-based access control applies.

To use both 802.1X and portal authentication on a port, you must specify MAC-based access control. For information about portal authentication, see "Configuring portal authentication."

prev	up	next
Setting the port authorization state	home	Setting the maximum number of concurrent 802.1X users on a port