Enabling 802.1X
When you enable 802.1X, follow these guidelines:
If the PVID is a voice VLAN, the 802.1X feature cannot take effect on the port. For more information about voice VLANs, see Layer 2—LAN Switching Configuration Guide.
Do not enable 802.1X on a port that is in a link aggregation or service loopback group.
To enable 802.1X:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable 802.1X globally. | dot1x | By default, 802.1X is disabled globally. |
3. Enter Ethernet interface view. | interface interface-type interface-number | N/A |
4. Enable 802.1X on a port. | dot1x | By default, 802.1X is disabled on a port. |