trill enable
Use trill enable to enable TRILL on a port.
Use undo trill enable to disable TRILL on a port.
Syntax
trill enable
undo trill enable
Default
TRILL is disabled on a port.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Before you enable TRILL on a port, first enable TRILL globally.
Configuration in Layer 2 Ethernet interface view takes effect only on the current port. Configuration in Layer 2 aggregate interface view takes effect on the current interface and its member ports. Configuration on the member port of an aggregate interface takes effect after the member port leaves the aggregation group.
Examples
# Enable TRILL globally, and enable TRILL on port .
<Sysname> system-view [Sysname] trill [Sysname-trill] quit [Sysname] interface [Sysname-] trill enable
Related commands
trill