trill drb-priority

Use trill drb-priority to set the DRB priority of a TRILL port.

Use undo trill drb-priority to restore the default.

Syntax

trill drb-priority priority

undo trill drb-priority

Default

The DRB priority of a TRILL port is 64.

Views

Layer 2 Ethernet interface view

Layer 2 aggregate interface view

Predefined user roles

network-admin

mdc-admin

Parameters

priority: Specifies a priority value in the range of 0 to 127. A higher priority value indicates a higher priority.

Usage guidelines

On a broadcast network, TRILL must elect a DRB. An RB with a higher DRB priority is preferred in DRB election. When two RBs have the same DRB priority, the RB with a higher MAC address takes precedence.

Configuration in Layer 2 Ethernet interface view takes effect only on the current port. Configuration in Layer 2 aggregate interface view takes effect on the current interface and its member ports. Configuration on the member port of an aggregate interface takes effect after the member port leaves the aggregation group.

Examples

# Set the DRB priority to 2 for TRILL port .

<Sysname> system-view
[Sysname] interface 
[Sysname-] trill drb-priority 2