system-id
Use system-id to configure a system ID for the RB.
Use undo system-id to restore the default.
Syntax
system-id system-id
undo system-id
Default
The RB automatically generates a system ID based on its MAC address.
Views
TRILL view
Predefined user roles
network-admin
mdc-admin
Parameters
system-id: Specifies a system ID in the format of xxxx.xxxx.xxxx, where each x is a hexadecimal number.
Usage guidelines
The system resets the TRILL process when the RB's system ID changes.
Examples
# Set the system ID to 1010.1020.1030 for the RB.
<Sysname> system-view [Sysname] trill [Sysname-trill] system-id 1010.1020.1030