set overload
Use set overload to set the Overload bit of LSPs and the lifetime of the set Overload bit.
Use undo set overload to restore the default.
Syntax
set overload [ timeout ]
undo set overload
Default
The Overload bit of LSPs is not set.
Views
TRILL view
Predefined user roles
network-admin
mdc-admin
Parameters
timeout: Specifies the lifetime of the set Overload bit. The value range for this argument is 5 to 3600 seconds. By default, the lifetime of the set Overload bit is infinite, which means that the Overload bit remains set until the undo set overload command is executed.
Usage guidelines
Do not configure this command on the root RB of a TRILL distribution tree. The root RB cannot forward traffic when the Overload bit of LSPs is set on the RB.
Examples
# Set the Overload bit of LSPs and set the lifetime of the set Overload bit to 1200 seconds.
<Sysname> system-view [Sysname] trill [Sysname-trill] set overload 1200