ingress assign-delay

Use ingress assign-delay to set the delay timer for the RB to switch ingress traffic to a new distribution tree.

Use undo ingress assign-delay to restore the default.

Syntax

ingress assign-delay delay

undo ingress assign-delay

Default

The delay timer is 300 seconds.

Views

TRILL view

Predefined user roles

network-admin

mdc-admin

Parameters

delay: Specifies the delay timer in the range of 1 to 3600 seconds.

Usage guidelines

When a distribution tree is added, the RB switches ingress traffic of some VLANs that use the RB as the AVF to the new tree to implement load balancing. However, the RB cannot use the new distribution tree to forward traffic before other RBs are ready to use the new tree. In this case, you can set a delay timer for the RB to switch ingress traffic to the new distribution tree.

Examples

# Set the delay timer to 600 seconds for the RB to switch ingress traffic to a new distribution tree.

<Sysname> system-view
[Sysname] trill
[Sysname-trill] ingress assign-delay 600

Related commands

ingress assign-rule load-balancing