display trill unicast-route
Use display trill unicast-route to display TRILL unicast routing table information.
Syntax
display trill unicast-route [ nickname nickname ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
nickname nickname: Specifies an RB by its nickname, a hexadecimal number in the range of 1 to fffe. If no RB is specified, the command displays information about all RBs.
verbose: Displays detailed information. If you do not specify this keyword, the command displays brief information.
Examples
# Display brief information about all entries in the TRILL unicast routing table.
<Sysname> display trill unicast-route Destinations: 2 Unicast routes: 2 Destination Interface NextHop ----------------------------------------------- 0xfa1b N/A N/A 0x899b XGE1/0/1 Direct
# Display detailed information about all entries in the TRILL unicast routing table.
<Sysname> display trill unicast-route verbose Destinations: 2 Unicast routes: 2 Destination: 0xfa1b NextHop count: 0 Neighbor ID: 0x0000 Destination: 0x899b NextHop count: 1 Neighbor ID: 0x0101 Interface: XGE1/0/1 NextHop: Direct
Table 15: Command output
Field | Description |
---|---|
Destinations | Number of destination RBs. |
Unicast routes | Number of unicast routes. |
Destination | Nickname of the destination RB. |
Interface | Outgoing port. |
NextHop | Nickname of the next-hop RB. |
NextHop count | Number of next hops. |
Neighbor ID | ID of the neighbor associated with the next hop. |