display trill peer

Use display trill peer to display TRILL neighbor statistics.

Syntax

display trill peer [ interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

interface interface-type interface-number: Specifies an interface by its type and number. If you do not specify an interface, the command displays information about all interfaces.

Examples

# Display TRILL neighbor statistics for .

<Sysname> display trill peer interface 
System ID: 00e0.fc58.123a
Interface: 
Circuit ID: 00e0.fc58.123a.01
State: Up
Holdtime: 8s
DRB priority: 64
Nickname: 0x899b
Uptime: 00:38:15

Table 12: Command output

Field	Description
System ID	System ID of the neighbor.
Interface	Local TRILL port directly connected to the neighbor.
Circuit ID	LSP number of the pseudonode.
State	Neighbor state: Up. Down.
Holdtime	Remaining holding time (in seconds) of the adjacency. If no Hello frame is received from a neighbor within the holding time, the neighbor is considered invalid. When a Hello frame is received from a neighbor within the holding time, the holding time is restarted.
DRB priority	DRB priority of the neighbor port.
Nickname	Nickname of the neighbor.
Uptime	Time for which the adjacency has been held.

prev	up	next
display trill neighbor-table	home	display trill rpf-table