display trill graceful-restart status
Use display trill graceful-restart status to display GR status information for TRILL.
Syntax
display trill graceful-restart status
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display GR status information for TRILL.
<Sysname> display trill graceful-restart status Restart status: RESTARTING Restart phase: LSDB synchronization Restart interval: 300s T3 remaining time: 140s Total number of interfaces: 1 Number of waiting LSPs: 3 T2 remaining time: 55s Interface: T1 remaining time: 2s RA received: Y CSNP received: N T1 expiration number: 1
Table 4: Command output
Field | Description |
---|---|
Restart status | Restart status:
|
Restart phase | Restart phase:
|
Restart interval | Restart interval in seconds. |
T3 remaining time | Remaining time of the T3 timer (in seconds). The initial value is 65535 seconds. The value of this field is updated according to the remaining time in the RA packet. |
Total number of interfaces | Total number of interfaces in the process. |
T2 remaining time | Remaining time of the T2 timer (in seconds). For GR of the Restart type, the initial value of the field is fixed at 60 seconds. For GR of the Start type, the initial value is the value set by using the graceful-restart interval command (by default, 300 seconds). |
Interface | Port name. |
T1 remaining time | Remaining time of the T1 timer (in seconds). The initial value of the field is 3 seconds. |
RA received | RA received flag bit:
|
CSNP received | CSNP received flag bit:
|
T1 expiration number | Number of T1 timer expiration times. The maximum value of the field is 10. |