oap client reboot
Use oap client reboot to restart an OAP client.
Syntax
oap client reboot client-id
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
client-id: Specifies an OAP client by its ID in the range of 1 to 255. Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.
Usage guidelines
When you execute this command for a client in registered state, the OAP manager sends a restart notification to the specified OAP client. The client restarts after receiving the notification. When you execute this command for a non-existent client, an error message appears.
Examples
# Restart OAP client 1.
<Sysname> system-view [Sysname] oap client reboot 1
Related commands
display oap client summary
oap client close